Displaying - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Table 2-2 Keys for editing
Key
Common key
Backspace
Left cursor key ← or
Ctrl_B
Right cursor key → or
Ctrl_F
Tab

2.3.2 Displaying

All command lines have the same displaying feature. You can construct the displaying mode as
required.
You can control the display of information on CLI as follows:
l
l
Table 2-3 Keys for displaying
Key
Ctrl_C
Space
Issue 01 (2011-07-15)
Display prompt and help information in both Chinese and English.
When the information displayed exceeds a full screen, it provides the pause function. In
this case, the user has three choices as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Function
Inserts a character in the current position of the cursor if the editing
buffer is not full and the cursor moves to the right. Otherwise, an
alarm is generated.
Deletes the character on the left of the cursor that moves to the
left. When the cursor reaches the head of the command, an alarm
is generated.
Moves the cursor to the left by the space of a character. When the
cursor reaches the head of the command, an alarm is generated.
Moves the cursor to the right by the space of a character. When
the cursor reaches the end of the command, an alarm is generated.
Press Tab after typing the incomplete key word and the system
runs the partial help:
l If the matching key word is unique, the system replaces the
typed one with the complete key word and displays it in a new
line with the cursor a space behind.
l If there are several matches or no match at all, the system
displays the prefix first. Then you can press Tab to view the
matching key word one by one. In this case, the cursor closely
follows the end of the word and you can type a space to enter
the next word.
l If a wrong key word is entered, press Tab and the word is
displayed in a new line.
Function
Stops the display and running of the command.
NOTE
You can also press any of the keys except the spacebar and Enter key
to stop the display and running of the command.
Continues to display the information on the next screen.
Table 2-3.
2 CLI Overview
18