Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
2.2.10 Configuring RED Operations
RED operation, an anti-congestion measures, monitors and further processes packet
forwarding even when no network congestion happens.
Please perform the following configurations in QoS view.
Table 2-19 Setting RED operation
Set RED operation
Cancel RED operation
Note:
The cards except A type ones do not support this command.
2.2.11 Setting Traffic Statistics
Traffic statistics count packets of designated service traffic, that is, the packets match
the defined ACL among those forwarded. You can view the information with the display
qos-interface traffic-statistic command.
Please perform the following configurations in QoS view.
I. Configuration on A Type Card
Table 2-20 Setting traffic statistics
Operation
Set traffic statistics
Remove
statistics setting
Display
information
Operation
traffic-red outbound { ip-group { acl-number |
acl-name } [ rule rule ] | link-group { acl-number |
acl-name } [ rule rule ] } qstart qstop probability
undo traffic-red outbound { ip-group { acl-number |
acl-name } [ rule rule ] | link-group { acl-number |
acl-name } [ rule rule ] }
traffic-statistic { inbound | outbound } { ip-group
{ acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }
undo traffic-statistic { inbound | outbound } { ip-group
traffic
{ acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }
traffic
display qos-interface [ interface-name | interface-type
interface-num ] traffic-statistic
Huawei Technologies Proprietary
Command
Command
2-21
Chapter 2 QoS Configuration