Maintaining Vll; Enabling Traffic Statistics On The Vll - Huawei quidway s7700 Configuration Manual

Smart routing switch
Hide thumbs Also See for quidway s7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
tunnel type: lsp
Reroute policy
Reason of last reroute : --
Time of last reroute
delay timer ID
resume timer ID
Run the display mpls l2vpn forwarding-info [ vc-label ] interface interface-type interface-
number command, and you can see that ENTRYTYPE of the master PW is SEND,
PWSTATE is ACTIVE, BFDSTATE is UP, and ADMIN is UP. The following is an example:
<Quidway> display mpls l2vpn forwarding-info interface vlanif 11
The Main PW Forward Information :
VCLABEL TNLTYPE ENTRYTYPE PWSTATE
---------------------------------------------------------------------------
23552
The Second PW Forward Information :
VCLABEL TNLTYPE ENTRYTYPE PWSTATE
---------------------------------------------------------------------------
23552

5.10 Maintaining VLL

This section describes how to maintain a VLL. Detailed operations include resetting the BGP
connection of the VLL, and monitoring the L2VPN running status.

5.10.1 Enabling Traffic Statistics on the VLL

This section describes how to enable the function of collecting statistics on VLL traffic before
viewing VLL traffic statistics.
Context
You can collect statistics on VLL traffic on the user-side interfaces that are bound to the VLL.
In this case, you need to enable the function of collecting statistics on VLL traffic on the device
before the VLL connection is set up.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mpls l2vpn traffic-statistics enable
The traffic statistics on the VLL is enabled.
Issue 01 (2011-07-15)
manual fault set or not:
AC OAM state:
BFD for PW session index:
BFD for PW state:
BFD for LSP state:
Local C bit is set,
,
CRLSP
SEND
1
Record(s) Found.
LSP
SEND
1
Record(s) Found.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
not set
up
257
up
true
Remote C bit is set
id: 0x10004
: delay 30 s, resume 10 s
: -- days, -- hours, -- minutes, -- seconds
: --
rest time :--
: --
rest time :--
BFDSTATE ADMIN CTLWORD CC CV TNLID
ACTIVE
UP
UP
BFDSTATE ADMIN CTLWORD CC CV TNLID
INACTIVE UP
UP
5 VLL Configuration
TRUE
1
8
0x20002
TRUE
1
8
0x10004
485

Advertisement

Table of Contents
loading

Table of Contents