Example For Configuring Traffic Statistics Based On Complex Traffic Classification - Huawei S3700HI Configuration Manual - Qos

S3700HI Ethernet Switches
Configuration Guide - QoS
1.7.4 Example for Configuring Traffic Statistics Based on Complex
Traffic Classification
After traffic statistics based on complex traffic classification is configured, the S3700 collect
traffic statistics on packets with the specified source MAC address.
Networking Requirements
As shown in
devices through Eth0/0/1 on the Switch. The Switch is required to collect the statistics on the
packets with the source MAC address of 0000-0000-0003.
Figure 1-4 Networking diagram for configuring traffic statistics based on complex traffic
classification
MAC:0000-0000-0003
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Create a VLAN and configure interfaces.
Issue 01 (2012-03-15)
#
return
Figure 1-4, PC1 with the MAC address of 0000-0000-0003 is connected to other
Eth0/0/1
PC1
Configure interfaces so that the Switch is connected to PC1 and the router.
Create an ACL to match the packets with the source MAC address as 0000-0000-0003.
Create a traffic classifier to match the ACL.
Create a traffic behavior to take the statistics on the matching packets.
Create a traffic policy, bind the traffic classifier to the traffic behavior in the traffic policy,
and apply the traffic policy to Eth0/0/1 in the inbound direction.
VLAN 20
ACL 4000
Traffic classifier c1
Traffic behavior b1
Traffic policy p1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VLANIF 20
20.20.20.1/24
GE0/0/2
20.20.20.2/24
Switch
1 Class-based QoS Configuration
Core
Network
Router
49