Configuring Traffic Statistics; Configuration Procedure Of Traffic Statistics - Huawei Quidway S3900 Series Operation Manual

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510
1.11.2 Configuration Procedure
Table 1-16 Configure WRED parameters
Operation
Enter system view
Enter Ethernet port
view
Configure
parameters
1.11.3 Configuration Example
Configure WRED parameters for queue 2 on Ethernet 1/0/1. Packets are dropped
at random when the queue length is more than 64 packets, and the drop
probability is 20%.
Configuration procedure:
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 1/0/1
[Quidway-Ethernet1/0/1] wred 2 64 20

1.12 Configuring Traffic Statistics

Refer to 1.1.12 Traffic-based Traffic Statistics for the introduction to traffic statistics.
1.12.1 Configuration Prerequisites
ACL rules used for traffic identifying are defined. Refer to the ACL module in the
book for defining ACL rules
The ports that needs this configuration are specified

1.12.2 Configuration Procedure of Traffic Statistics

Table 1-17 Configure traffic statistics
Operation
Enter system view
Enter Ethernet port
view
Command
system-view
interface
interface-type
interface-number
WRED wred queue-index
qstart probability
Command
system-view
interface
interface-type
interface-number
Huawei Technologies Proprietary
1-25
Chapter 1 QoS Configuration
Description
—
—
Required
The WRED function is disabled
by default
Description
—
—