JEOL JSPM-5200 Instructions Manual page 496

７ APPENDIX
■ CITS Header data structure
The following is information on the CITS header data structure and overall CITS image
information is presented.
• CITS image display option recording structure: CITS DispOptType
• Table 11 Check flag
7-48
Address Type
short
0x9BD4
0x9BD6 short
0x9BD8 short
short
0x9BDA
short
0x9BDC
0x9BDE
CITSDispOptType
0x9CD8
Char [128]
0x9D58 short
0x9D5A
:
Type
short
short
unsigned char
double
double
unsigned char
short[64]
char[100]
TOPO display: ON (1)/OFF (0)
Voltage display on the image: ON (1)/OFF (0)
Overlay: (1)/Opaque: (0)
Default value (00000000 00000011)
Size
2 bytes WinSPM Revision number
2 bytes No. of CITS images
2 bytes CITS image width (128 pixels)
2 bytes CITS image height (128 pixels)
2 bytes No. of current images
250
Options for display
bytes
128
Buffer
bytes
2 bytes (Intrinsic) reference number
CITS Image Header (1)
Size
2 bytes Check flag（
2 bytes No. of CITS images to display
1 byte Display mode（
8 bytes Conductance at level 0
8 bytes Conductance at level 255
1 byte Selection of display（
128 bytes Number of CITS image
100 bytes Buffer
Note
Note
Table 11）
Table 12）
Table 13）
bit
0 1 2
○
○
○
= (0003)
2 16
TMPM5200-2
...