JEOL JSPM-5200 Instructions Manual page 264

Approa ch On
This starts the approach action. The approach is performed based on the parameters
(reference, filter and loop gain) set on the current dialog.
For detailed approach action, refer to Section 5.10.3 "■ Tip."
Exit
Clicking this button closes the SPM Parameter window.
List of re lated operation buttons
Thes e are the lis
when you open it, just after starting up WinSPM. There are some buttons that do not
appe ar, depending on the SPM instrument or SPM mode.
TMPM5200-2
t of related operation buttons that appear on the SPM Parameter window
５ MEASUREMENT OPERATION
5-201