Advanced Tab - JEOL JSPM-5200 Instructions Manual

5.6.2 Adva nced Tab
The Adva
It is possible to specify parameters in detail on the Advanced t
to specify
■ Check
ing before approaching
Before performing approaching, check whether the preparation has been completed
according to the procedure in Sect. 5.3, "Preparing Approach."
• Has coarse approaching been executed in such a way that the
can tilever tip and the specimen surface is
• Is the
TMPM5200-2
nced tab window is used for the advanced operation mode in the STM
every parameter.
Z stage position in the approaching-possible range?
Advanced tab window
0.3 mm or less?
５ MEASUREMENT OPERATION
mode.
ab window, but you have
distance between the
5-143