Table of Contents
Advertisement
When the images are grabbed using this mode, they are separately grabbed as
different images.
• 2 Inputs
The function of this 2 Inputs is the same as that of 2 Inputs (512), except for having
256 × 256 pixels.
• 4 Inputs
Four different kinds of data are acquired and displayed simultaneously. Scanning is
performed to acquire one image using 256 × 256 pixels. Specify source signals
boxes of the Display Source. Four images are displayed in the following order in the
Display Window.
When i
images.
• Line Scan 128, Line Scan 256, L
In these modes, you can acquire data only by using the X-direction scanning and
stopping the Y-direction
modes are useful for dynamic observation of time-varying phenomena on the
specimen surface such as step edge swaying.
Specify the Y (line) position on which the data is ac
button in the Tip window. Scanning is performed only on this line in the X direc-
tion.
• M
ontage
In this mode, divide a specified observation area on a specimen surface into many
small scanning areas to obtain images; then compose a montage image. Spec
parameters such as observation
setting montage parameters and selecti
click on the Repeat button. Then,
grabbed.
TMPM5200-2
Display
Source
Display
Source
Display
Source
mages are grabbed using this mode, they are separately grabbed as different
ine Scan 512 and Line Scan 1024
scanning to display data in the Display Window. These
５ MEASUREMENT OPERATION
Display
Source
1
2
Display
Source
1
2
Display
Source
3
4
range for montage in the Montage window. After
ng Montage in the Acquisition selection box,
scanning starts and a montage image can be
quired by using the Position
1 to 4
ify
5-205
Advertisement
Table of Contents
