Table of Contents
Advertisement
５ MEASUREMENT OPERATION
resistance or other resistances. This causes the sensor to display a higher temperature on
the dialog than the actual temperature. Set an offset to correct this error.
When the actual temperature of the specimen is 20 ℃ (the temperature is measured
before heating or cooling), if the indicated temperature on the dialog under Offset 0
appears 25 ℃, set – 5 for Offset.
The temperature offset applies for both display temperature and setting temperature.
5-262
TMPM5200-2
Advertisement
Table of Contents
Need help?
Do you have a question about the JSPM-5200 and is the answer not in the manual?