Edit Sps Mapping Data Set - JEOL JSPM-5200 Instructions Manual

６ ANALYSIS OPERATION

6.11.4 Edit SPS Mapping Data Set

Edit
Used to copy or delete the designated SPS mapping image, or add a comment or title on
a designated bias voltage image in the CITS bias voltages.
Select Edit in the Edit SPS mapping Data Set pulldown menu.
The SPS Mapping Select window will appear. The following operations can be
performed.
• Previous
The mapping image prior to the current image is displayed.
• Display
The current mapping image is displayed again.
• Next
The mapping image after the current one is displayed.
• Copy
An arbitrary mapping image extracted as an independent image from among the
SPS mapping images is stored in the computer memory.
For example, the extracted mapping image is treated as an independent image.
Therefore, image processing can be performed for this image in the same manner as
for an ordinary mapping image.
• Delete
Arbitrary mapping images are deleted from the SPS mapping data.
6-96
２
３
４
５
Delete
６
７
８
Original CITS data
3
5
After 'Delete'
operation
TMPM5200-2