JEOL JSPM-5200 Instructions Manual page 187

５ MEASUREMENT OPERATION
3.
Click on the Advanced button in th
Source tab in the Advanced Control window that appears. Set parameters as
follows.
4.
Select the Scan tab in the Advanced Control window, and then check the Add
External Z Signal check box.
5.
Click on the Probe button in the SPM Parameters window, and the Tip
window opens; then deselect the Tip Retract button.
5-124
Sometimes an oscillating sound is made depending upon the characteristic
frequency of the scanner that you use. If it happens, reduce the oscillation level
(OSC Level/V), or shift the present oscillat
quency/kHz) setting position until the sound is not made
e Advanced tab window. Select Display
ion frequency (OSC Fre-
.
TMPM5200-2