JEOL JSPM-5200 Instructions Manual page 454

７ APPENDIX
5.
Click on MAIN MENU in the DT-Open Layers Software Development Kit
window to return to the OmniCD main (DT-Open Layers) window.
6.
Click on EXIT to end installing the A/D Board device driver.
Shutting down Windows and installing the DT3016 A/D converter board
1.
Shut down Windows and turn off the PC power.
2.
Install the DT3016 board on the desired PCI bus and restart the PC.
When Windows restarts, Plug and Play operates, recognizing the DT3016 board and
setting the driver automatically.
3.
After the device driver has been set automatically, restart the PC, following
the instructions from Windows.
This completes the installation of the DT3016 board in the PC.
7-6 TMPM5200-2