1.2
Procedures to Replace Periodical Maintenance Parts
Fuser unit and laser unit
1.2.1
<Uninstalling Procedure>
Check that the following before entering the procedures.
• Make sure that the AC cord is disconnected from the machine.
• Make sure that the Drum/toner ASSY is removed.
• Make sure that the Duplex feed ASSY is removed.
• Make sure that the Paper tray is removed from the machine.
(1) Open the Back cover.
(2) Remove the Arms of the Back cover from the Pins.
Pin
Arm
Fig. 4-1
4-3
Pin
Arm
Back cover
Confidential