Intake Cover; Tray Unit Front Cover/Tray Unit Rear Cover/Connector Cover - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 4.0 Jan. 2008
3.4.7

Intake cover

[1]
3.4.8

Tray unit front cover/Tray unit rear cover/Connector cover

[1]
1. Remove four screws [1] and remove the tray unit front cover [2].
2. Remove two screws [3] and remove the tray unit rear cover [4].
3. Remove the screw [5] and remove the connector cover [6].
NOTE
• When installing the tray unit front cover, snap the tab [7] first.
• When installing the tray unit back cover, snap the tab [8] first.
[4]
[3]
[2]
A01GF2C530DA
[7]
[8]
[1]
[2]
[7]
1. Remove the finisher unit.
See P.28
2. Remove the finisher unit rear cover.
See P.20
3. Remove the finisher unit upper
cover.
See P.21
4. Remove the C-ring [1].
5. Remove the screw [2] and the metal
bracket [3], and the intake cover [4].
[6]
[5]
[4]
[8]
3. Other
[3]
A01GF2C531DA
23