Security Service; List Of Security Service; Starting/Exiting; Starting Procedure - Konica Minolta BIZHUB C3100P Service Manual

4. SECURITY SERVICE

4.1 LIST OF SECURITY SERVICE

NOTE
• After exiting Service Mode, you must turn OFF the main power switch. Turning ON the main power switch again makes the
changes to the Service Mode setting take effect.

BILLING SETTING

ADMIN PASSWORD
CE PASSWORD

4.2 STARTING/EXITING

Starting procedure

1. Call [SERVICE MODE] to the display.
2. Press the following keys in this order.
Hold on the Cancel/Access key for 2 seconds -> up key -> down key
3. The Billing Setting screen appears.

Exiting procedure

1. Press the Cancel/Access key.
4.3 BILLING SETTING

4.3.1 COUNTER SETTING

(1) L_PAPERSIZE_MODE
(a) Use
• To set the counting method for the size counter.
• To set the size regarded as the large size (2 counts.)
(b) Default setting
• US: L_PAPERSIZE_MODE1
• JP: L_PAPERSIZE_MODE0
• Other: L_PAPERSIZE_MODE2
(c) Setting item
L_PAPERSIZE_MODE0
L_PAPERSIZE_MODE1
L_PAPERSIZE_MODE2
L_PAPERSIZE_MODE3
NOTE
• When the L_PAPERSIZE_MODE is set to "L_PAPERSIZE_MODE1" or "L_PAPERSIZE_MODE0", the machine operate with
following conditions regardless of the each control panel settings.
Total Counter: Mode1
(2) TOTAL COUNTER
(a) Use
• To set the counting method for the total counter.
(b) Default setting
• JP: Mode 1
• Other: MODE2
SECURITY SERVICE
COUNTER SETTING L_PAPERSIZE_MODE
TOTAL COUNTER
LICENSE MGMT GET REQUEST CODE
INITIALIZE
ACTIVATION
DEACTIVATION
ENABLED FUNC LIST
DEACT. FINISH
No Count
When it exceeds 279 mm in the main scan direction and 420 mm in the sub scan direction, it is
regarded as the large size.
* Not counted in this machine
When it exceeds 215.9 mm in the main scan direction and 355.6 mm in the sub scan direction,
it is regarded as the large size.
When it exceeds 203 mm in the main scan direction and 330 mm in the sub scan direction, it is
regarded as the large size
I ADJUSTMENT/SETTING > 4. SECURITY SERVICE
I-24
Ref. page
I.4.3.1 COUNTER SETTING
I.4.3.2 License Management - Get
Request Code
I.4.3.3 License Management - Initialize
I.4.3.4 License Management - Activation
I.4.3.5 License Management -
Deactivation
I.4.3.6 License Management - List of
Enabled Functions
I.4.3.7 License Management - DEACT.
FINISH
I.4.4 ADMIN PASSWORD
I.4.5 CE PASSWORD