36 MODE
7.2.3 Sensor output check
For the sensor output check, the following items are
provided; however, do not conduct them in the field:
[1. Surface potential sensor output]
[2. Max. density sensor output]
[3. Gamma sensor output]
7.2.4 Exclusive paper setting
This setting is used when the user cannot obtain the
satisfactory results of transfer, separation or fixing
with the standard setting due to a special paper
being used.
This setting is applicable when [Exclusive paper A
to D] is selected in the key operator mode [Paper
type/ Special paper size set].
In default, the following paper data is entered for
each destination area.
2
• For Japan: 80 g/m
• For inch area: 105 g/m
• For metric area: 90 g/m
Note:
• When setting data, be sure to follow the
instructions given by Minolta Technology
Support Center.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [1. Process adjustment] key.
3. "Process adjustment menu screen"
Press the [4. Exclusive paper setting] key.
4. "User paper setting menu screen"
For the user paper setting menu, the following
items are provided which correspond to the
setting key of the same name in the key opera-
tor mode.
[1. Exclusive paper A setting]
[2. Exclusive paper B setting]
[3. Exclusive paper C setting]
[4. Exclusive paper D setting]
color specified paper
2
color specified paper
2
color specified paper
CF5001 Field Service Ver.1.0 Sep 2003
5. For setting, press the key of an item you want
to set. Set the following 12 types of setting for
each exclusive paper A to D.
• 2nd transfer offset Side 1
• 2nd transfer offset Side 2
• 2nd separation AC offset Side 1
• 2nd separation AC offset Side 2
• 2nd separation DC offset Side 1
• 2nd separation DC offset Side 2
• Fixing (U) roller temp (idle)
• Fixing (U) roller temp (print)
• Fixing (L) roller temp (idle)
• Fixing (L) roller temp (print)
• Fixing (U and L) roller temp. difference
• Compulsion off (upper heater) paper width
<261mm
• Compulsion off (upper heater) paper width
>=261mm
• Line speed
6. Press the [PREVIOUS SCREEN] key to return
to the "User paper setting menu screen."
2-58