State Confirmation; Sensor Check - Konica Minolta bizhub 500 Service Manual

Field Service Ver.2.0 Jan. 2007

10.7 State Confirmation

10.7.1

Sensor Check

This machine is provided with an input/output check function as a self-diagnostic function. For the sensor check
(input check), the state confirmation of each signal can be made.
A. Procedure
1.
"Service Mode screen"
Press [State Confirmation].
2.
"State Confirmation screen"
Press [Sensor check].
3.
"Sensor Check screen"
Press [Check Code] and, when entering the sensor check code in 3 digit through the copy count setting
button, a state (ON/OFF or value) is displayed in the Result area.
4.
For the multi mode, press [Multi Code] and enter a three-digit multi code through the copy count setting
key.
5.
When conducting the sensor check of other signal sources, repeat steps 3 to 4.
B. List of sensors
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
10 1
2
3
4
5
6
7
11 1
2
3
4
5
6
Confidential – for internal use only, do not distribute
TCRS Drum temperature
TCRS TCR sensor
TCRS TCR sensor
TH1 Thermistor /1
TH2 Thermistor /2
IDCS IDC sensor
HUMS Humidity sensor
VR1 Paper size VR/BP (bypass)
PS18 paper empty sensor /BP (bypass)
PS23 Lift sensor (bypass)
— Connect detection signal (bypass)
PS19 Paper size sensor /BP1 (bypass)
PS20 Paper size sensor /BP2 (bypass)
PS21 Paper size sensor /BP3 (bypass)
PS22 Paper size sensor /BP4 (bypass)
PS5 Paper empty sensor /1
PS9 Near-empty sensor /1
PS6 Upper limit sensor /1
PS8 Tray set sensor /1
PS10 Paper size sensor /Rr1
PS11 Paper size sensor /Fr1
Name
10. SERVICE MODE
Display and signal source
ON OFF
0 to 255 *1
No paper Paper
Up position Down position
Connection Non-connection
Paper No paper
No paper Paper
Near-empty Non-near-empty
Upper limit Not at upper limit
Set Not set
*2
213