Table of Contents
Advertisement
Setting Sleep mode (Energy saving mode)
Default setting: On
Your machine is initially set to be in the Sleep mode automatically when 5 minutes
has passed after you pressed any key last.
If you want to set the Sleep mode to Off, you can set it here.
Note: If you want to change the time, see page 1.19.
1
Press Program key,
, 1, 0, 5,
B
Sleep Mode
:On
/ /Enter
2
Press
or
until the mode you want appears.
3
Press
to save the setting.
ENTER
Helpful Tip: By pressing
ENERGY SAVING
mode immediately, regardless of the on/off setting or time setting on
page 1.19. To use the
ENERGY SAVING
Soft key in advance. (See page 3.16.)
Note: All
lamps on the control panel will not be off, even when the machine is
LED
in the sleep mode.
Primary mode
Default setting: None
You can set the primary standby mode in this operation. After finishing any jobs,
your machine will return to the mode you set here immediately.
1
Press Program key,
, 1, 0, 7,
B
Primary Mode
:None
/ /Enter
2
Press
or
until the mode you want appears.
3
Press
to save the setting.
ENTER
.
ENTER
, you can switch the machine to Sleep
key, you should assign it to a
.
ENTER
Setting the paper source
Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
You can choose one of following for each paper source:
"Fax":
Select this if you want to use the paper source you selected for fax-
ing and list (or report) printing.
"Copy":
Select this if you want to use the paper source you selected for copy-
ing only.
"Fax/Copy": Select this if you want to use the paper source you selected for fax-
ing, list (or report) printing and copying.
"Not Used": Select this if you want to use the paper source you selected for PC
printing.
Note: PC printing is available only when your machine has the
optional printer controller kit.
1
Press Program key,
, 1, 0, 9,
B
Cassette1
:Fax/Copy
/ /Enter
2
Press
or
until the mode you want appears.
3
Press
to save the setting. The
ENTER
Bypass Tray:Fax/Copy
/ /Enter
4
Press
or
until the mode you want appears.
5
Press
to save the setting.
ENTER
Setting 2-bin tray (Option)
Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray,
PC-Fax exit: Upper tray
You will set where to exit the printed paper in this operation.
Note: This operation will appear only when your machine has the optional 2-bin
tray unit.
1
Press Program key,
, 1, 1, 0,
B
2-Bin Tray
:Off
/ /Enter
Changing the default settings
. The
shows:
ENTER
LCD
shows:
LCD
.
ENTER
4.9
Advertisement
Chapters
Table of Contents
