Tech. Rep. Mode; Tech. Rep. Mode Function Setting Procedure; Setting In The Tech. Rep. Choice; Sheet-Through-Adf - Konica Minolta bizhub 250 Service Manual

6. Tech. Rep. Mode

6. Tech. Rep. Mode
6.1

Tech. Rep. Mode function setting procedure

For details of how to display the Tech. Rep. Mode screen, see the Adjustment/Setting
of the main unit service manual.
6.2

Setting in the Tech. Rep. Choice

6.2.1

Sheet-through-ADF

A. Registration Loop
Functions • To adjust the length of the loop to be formed in paper before the Registration Rollers.
Use • For factory adjustment only
B. Zoom
Functions • To set the CD and FD scan zoom ratios in the sheet-through ADF.
Use • When setting up the ADF
Setting/ 23
Procedure
C. Feed (CD)
Functions • To adjust the CD image scan start position in the sheet-through ADF.
Use • When setting up the ADF
Setting/ 24
Procedure
D. Feed (FD)
Functions • To adjust the FD image scan start position in the sheet-through ADF.
Use • When setting up the ADF
Setting/ 24
Procedure
6.3

Setting in the Function

6.3.1

Org. Width Detect Adjust

Functions • To detect the size of the original loaded in the ADF
Use • When the Variable Resistor is replaced with a new one
• When the backup data is initialized
Setting/ 18
Procedure
18
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Field Service Ver. 1.0 Aug. 2005