Call Detail Recording Using A P500 Printer - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8 Configuration guidelines
8 Configuration guidelines
Chapter contents
This chapter discusses the following topics.
Section 8.1, "Call detail recording using a P500 printer"
Section 8.2, "Call detail recording using a call charge computer (GCM, Teledata)"
Section 8.3, "Displaying an incoming call as a company name"
Section 8.4, "Busy signal for call waiting parties on the AC when S0 channels are still
available"
Section 8.5, "Configuring voice mail"
Section 8.6, "Configuring toll restriction per extension"
Section 8.7, "Configuring a fax machine"
Section 8.8, "Configuring an ISDN system interface"
Section 8.9, "Configuring an ISDN multi-device connection with MSN no. assignment" page 8-15
Section 8.10, "Configuring Call Management with group call and call forwarding - no
answer"
Section 8.11, "Announcement before answering (on analog port)"
Section 8.12, "Assigning incoming MSI calls"
Section 8.13, "Configuring fixed night service"
Section 8.14, "Configuring an intercept extension per line"
Section 8.15, "CorNet networking"
Section 8.16, "Configuring the boss/secretary function"
Section 8.17, "Boss/secretary systems (TOP)"
Section 8.18, "Configuring an internal S0 bus with multiple extensions"
Section 8.19, "Configuring call pickup groups"
Section 8.20, "Configuring a second V24 interface"
Section 8.21, "Configuring an entrance telephone and entrance telephone ring
destination"
Section 8.22, "Configuring a door busy actuator"
Section 8.23, "Programming a sensor as an alarm dialling device"
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_8.htm (1 of 2) [06/04/2000 13:08:25]
Topic
page 8-3
page 8-4
page 8-5
page 8-8
page 8-9
page 8-11
page 8-13
page 8-14
page 8-16
page 8-18
page 8-20
page 8-21
page 8-23
page 8-25
page 8-42
page 8-43
page 8-49
page 8-50
page 8-51
page 8-52
page 8-53
page 8-54