Configuring Call Management With Group Call And Call Forwarding - No Answer - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.10 Configuring Call Management with group call and call forwarding - no answer
8.10 Configuring Call Management with group call
and call forwarding - no answer
Introduction
Call Management allows you to configure group calls with call forwarding - no answer. In order for
this to be possible, extensions must be assigned to the appropriate group. This group is assigned one
entry each for referencing to a specific index in the call forwarding - no answer table for day service
and night service and for internal traffic. The sequence for call forwarding - no answer is defined in
this table.
Example
During day service, external calls for extension number 450 are first to be signalled at all extensions
in group 350 (extensions 250, 251, 252); after 4 rings, they are to be forwarded to extension 300.
Programming with Hicom Assistant T
Step Entry
1. *95 31994 Start system administration
2. 16-15-1
3.
*250
4.
+ *251
5.
+ *252
6. F7 F7 18
7. 1
8.
#29
9.
+ *300
10. F7 18-3
11.
#450
12.
*29
13. F7-5
14.
#29
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_810.htm (1 of 2) [06/04/2000 13:12:38]
Action
Select Group
Enter extension 250
Enter extension 251
Enter extension 252
Select CM-Elements
Select CM-Targets
Select destination list 29*
Enter extension 300 as 2nd member List 29, Mbr 2: 300
Select Extern. Calls, Day
Select call number 450
Enter list 29 for call no. 450
Select the number of call cycles
Select list 29
Display
System Administration
Grp 350, Mbr 1: -
Grp 350, Mbr 1: 250
Grp 350, Mbr 2: 251
Grp 350, Mbr 3: 252
CM-Elements
List 1, Mbr 1: called
List 29, Mbr 1: called
Call No. 200: 30
Call No. 450: 30
Call No. 450: 29
for list 1: 3
for list 29: 3