Relocation Function - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
The feature is executed via Hicom Assistant E as follows:
Step
1. Reset activated feature
System status
2. System-wide
3. Flags
4. Select the extension whose features should be cancelled.
Perform feature check via Hicom Assistant T
Check the feature for error-free functioning as follows:
Step
1. Activate call forwarding on a terminal.
2. Dial the code (#0) for "reset activated features".
3. Call forwarding is reset.

7.10.12 Relocation function

Definition
This feature allows terminals to be plugged in at a new location without having to change the system
configuration afterwards. When a terminal is moved, the extension number and extension features
(e.g. activated call forwarding, key assignments, etc.) remain unchanged.
This ensures that all extensions involved in the move are again available as quickly as possible.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (17 of 19) [06/04/2000 13:07:31]
Action
Action
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
OfficePoint
x x
- -
Dependency/Limitation
OfficeOne
x
-