Requirements For The Operation Of Hicom Cordless 150 E - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 12 Cordless Multicell Integration CMI
Radio tests
Checking the radio coverage
Testing the radio quality
Result documentation
Testing the Hicom cordless 150 E components
Information for correction of possible mobile telephone faults
Site selection for the base stations
Technical data and functions of Hicom cordless 150 E Version 1
System data
Base station data
Mobile telephone data
Hicom cordless 150 E system number
Features of the base station
Features of the mobile telephone
12.2 Requirements for the operation of Hicom
cordless 150 E
Plug-in module
highly accurate clock pulse).
Module not available: upgrade CGM (plug-in contact on CBMOD).
SLMC8 module
Module not available: upgrade SLMC8. For further information on upgrading periphery boards,
please refer to
The SLMC8 has a unique code and can only be used once to equip a Hicom 150 E
OfficePro system with Hicom cordless 150 E.
When the SLMC8 board is plugged in, 16 MTs are enabled for use (PIN numbers are
allocated) and can be logged in. Other MTs must first be enabled before they can be
used (see
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_12.htm (3 of 45) [06/04/2000 13:05:55]
CGM (S30807-Q6906-X) for CBMOD board (supplies the base station with
Section 6.1.2.
Section 12.4).
page 12-19
page 12-26
page 12-28
page 12-30
page 12-50