Advisory Messages - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.8 Features for internal traffic

7.8.9 Advisory Messages

Definition
Each optiset E station with a display can activate an advisory message configured in the system.
When an extension that has activated an advisory message is called, the relevant advisory message
appears on the caller`s display.
It is possible to have texts with variable parameters whereby the parameters (e.g. time) are entered
during activation. The terminal`s numeric keypad is available for entering additional characters.
In the case of an optiset E memory additional individualised texts can be entered and sent, but not
stored.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Number of advisory messages in
system
Max. no. characters in advisory
message
Dependencies/Limitations
Subject
CFW In the case of a CFW, the advisory message is displayed on the dialled telephone
extension.
Configuration options
This feature does not have to be explicitly configured.
Programming Feature Via Hicom Assistant T
Advisory messages can be modified as shown below using Hicom Assistant T (optiset E memory is
required):
Step
1. Change advisory messages
*9531994
2. 19-12 => Display Text Menu - Absence Text
3. Select relevant text
Programming Feature Via Hicom Assistant E
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (14 of 17) [06/04/2000 13:11:11]
OfficePro
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependency/Limitation
Action
OfficeCom
x x
U - terminal with display
P0/E
10 10
24 24
OfficePoint OfficeOne
x
10
24
x
10
24