Traffic Restriction Groups - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.6 Features for outgoing external traffic
2. Classes of service
3. Allowed/Denied numbers
4. Configure extension class of service
Options
5. Classes of service
6. Station
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Assign outward-restricted trunk access to an extension
2. The extension cannot set up any outgoing external connections (exception: system
speed-dialling)

7.6.12 Traffic Restriction Groups

Definition
A number of traffic restriction groups (TRGs) are provided in the system for all extensions. These
groups define information on toll restriction and route reference (incoming/outgoing) for extensions
and lines.
The following is defined by a TRG matrix:
whether an extension is authorised to seize a trunk line,
whether an extension can seize a trunk line only in the incoming direction or only in the
outgoing direction or
whether an extension can seize a trunk line in the incoming and outgoing directions.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Number of TRGs
Dependencies/Limitations
Subject
TRG By default all extensions and lines are located in TRG 1.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_76.htm (16 of 21) [06/04/2000 13:10:46]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
6
Dependency/Limitation
Action
OfficePoint
x x
- -
6 6
OfficeOne
x
-
6