Call Parking - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.1 Features for all traffic types

7.1.2 Call Parking

Definition
You can use a procedure to park both internal and external calls. The system then places the calls on
hold, and they can be retrieved from all terminals.
The park feature can be activated only while the user is engaged in another call. The user must assign
a virtual number (park position 0-9) to the connection to be parked. The number must then be
specified when the call is retrieved.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Number of calls parked simultaneously
Dependencies/Limitations
Subject
Park
Park
Conference
Call forwarding
DTMF
Occupied park position If the park position selected for parking a call is already occupied, a
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Set up a call.
2. Park the call by dialling the service code (*56).
3. Suffix-dial the park position.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (2 of 18) [06/04/2000 13:09:15]
OfficePro
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Max. 10
It is not possible to park an undialled line.
A call must be answered before it can be parked.
A conference cannot be parked
After a recall, a parked call does not follow call forwarding
If an extension has activated DTMF transmission, DTMF mode will be
deactivated automatically when the park feature is activated.
negative confirmation tone will sound. The number does not appear on the
screen and another park position can be selected.
Action
OfficeCom
x x
- -
Max. 10
Dependency/Limitation
OfficePoint OfficeOne
x
-
Max. 10 Max. 10
x
-