Hicom Cordless 150 E System Number; Base Station Features - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 12 Cordless Multicell Integration CMI
Operating temperature 0 °C to +45 °C
Charging unit
Product safety
Power supply
Charging time, first-time use
Quick charge
Trickle charge
Displays for charging procedure LED

12.9.4 Hicom cordless 150 E system number

The radio code of the Hicom cordless 150 E system is used to identify the beacon in the air and
consists of the following:
a system-specific part
the number of the base stations.
This makes it possible to synchronise the mobile telephones which are logged onto the system.
The system-specific part = Hicom cordless 150 E system number consists of EIC (European Installers
Code), FPN (Fixed Part Number) and FPS (Fixed Part Subnumber).
The system number of the SLMC8 is issued by the factory, is unique to each board and
cannot be changed on the board.
When an SLMC8 board is started up in a non-CMI system, the Hicom cordless 150 E system number
is transferred to Hicom 150 E OfficePro and transmitted via the base station.
If the system already has a Hicom cordless 150 E system number, this is transmitted.
The system number can be administered using Hicom Assistant E.

12.9.5 Base station features

Base station
10 carrier frequencies each with 12 transmit and 12 receive time slots based on DECT
(in Hicom cordless 150 E Version 1 only 6 time division multiplex channels are used)
Software interface to system: CorNet-T
Hardware interface to system: 1 U
Remote supply via U
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_12.htm (42 of 45) [06/04/2000 13:05:57]
Plug-in power pack in accordance with EN 60950
Charging unit: 230 V AC plug-in power pack
Output voltage/current: approx. 5 V/approx. 200 mA
approx. 16 hours
Mobile unit battery: approx. 5 hours
Stand-by battery approx. 20 hours
Radio
connection with 4 B channels
P0/E
interface
P0/E