Names; Configuring A Door Busy Actuator - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.22 Configuring a door busy actuator

8.22 Configuring a door busy actuator

Introduction
You can control an external door busy display by means of an actuator.
Example
Actuator 1 is to be configured as a busy display for the entrance telephone.
Extension 19 must already be configured as an entrance telephone.
The name "Door busy" is to be assigned to actuator 1
Programming with Hicom Assistant T
Step Entry
1. *95 31994
2. 26-1
3.
* 5
4.
F2 * 1
5.
F2 * 19
6. F2 *
Engaged
7. F8 F7
Programming with Hicom Assistant E
Step
1. Options -> Trunk modules -> Actors
Note
An external busy display must be connected to the actuator's NO contact for the purpose of signalling.
Current carrying capacity of contacts, see
React time = entered value x 100 ms
| Siemens
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_822.htm (1 of 2) [06/04/2000 13:13:25]
Start system administration
Select the Type submenu in the Actuator Setup
menu
Change the parameter in the Engaged Display
Define the actuator's react time in the React Time
submenu
Enter the doorphone extension in the "Assigned
ext." submenu
Assign the name of the actuator in the "Actuator
name" submenu
Exit system administration
Action
| Home | First Page
Action
Tabelle 3-42
| Previous Page | Next Page
Display
System Administration
Actr No.1:-
Actr No.1: Engaged Display
Actr No.1: 1
Actr No.1: 19
Actr No.1: Engaged Display
Set time, Set date
| Search | Info | Help |