Configuring Call Pickup Groups - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.19 Configuring call pickup groups

8.19 Configuring call pickup groups

Introduction
You can configure call pickup groups. On the basis of the procedure described, it is possible to answer
a call from another extension located in the same call pickup group.
Each extension can be entered in only one call pickup group.
Example
The extensions with numbers 200, 202, 203 and 204 are to comprise call pickup group 1.
Programming with Hicom Assistant T
Step Entry
1. *95 31994 Start system administration
2. 14-18 Select Call Pickup Group
3. Enter ext. 200 in Call Pickup Group 1 Ext 200: 1
*1
4. Enter ext. 201 in Call Pickup Group 1 Ext 201: 1
+ *1
5. Enter ext. 202 in Call Pickup Group 1 Ext 202: 1
+ *1
6. Enter ext. 203 in Call Pickup Group 1 Ext 203: 1
+ *1
7. Enter ext. 204 in Call Pickup Group 1 Ext 204: 1
+ *1
8. F8 F7 Exit system administration
Programming with Hicom Assistant E
Step
1. Options -> Incoming Calls -> Call pickup
| Siemens
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_819.htm (1 of 2) [06/04/2000 13:13:16]
Action
Action
| Home | First Page | Previous Page
Display
System Administration
Ext 200: -
Set time, Set date
| Next Page | Search | Info | Help |