Associated Dialling - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
2. Set up station
3. Station
4. Flags
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Change the display for an optiset E terminal.
2. The display on the relevant terminal is set to the language selected.

7.10.7 Associated Dialling

Definition
Via a PC, a user can instruct the system to set up a voice connection to another extension in the
system. In the case of an a/b connection, this can be implemented by means of a dialling aid interface
(e.g. Teleint). It can also be implemented by means of a PC at the S
Any authorised extension in the system can execute associated dialling for another extension. The
user defines the extension number of the destination extension in the PC address book and activates
dialling. The PC seizes the S
message.
Access is initiated by specifying a code and the extension for which dialling is to be executed. The
subsequent digits are then interpreted as though they were being dialled by the extension specified in
the access operation.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Trunk group A trunk group code may have to be dialled to seize an external trunk according to
the system configuration.
Call forwarding If the extension for which the dialling is to be executed has activated call
forwarding, call forwarding is not executed.
Configuration options
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (11 of 19) [06/04/2000 13:07:31]
Action
bus and informs the system of the extension number in an ISDN
0
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
OfficePoint
x x
- -
Dependency/Limitation
bus.
0
OfficeOne
x
-