Configuring An Internal S0 Bus With Multiple Extensions - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.18 Configuring an internal S0 bus with multiple extensions
8.18 Configuring an internal S0 bus with multiple
extensions
Introduction
Each S bus can support up to 8 terminals or telephones. For this purpose, one or more system ports
0
must be configured as a ISDN bus.
Example
Port 4 is to be configured as a ISDN bus.
Programming with Hicom Assistant T
Step Entry
1. *95 31994 Start system administration
2. 20 -4-1 ISDN Parameter Menu, EU Parameter Menu, S
Config.
3. Select Port 4
# 4
4. Configuration as an ISDN bus
* 4
5. F8-F7 Exit system administration
Programming with Hicom Assistant E
Step
1. Options -> Lines / networking -> Trunks -> Flags
Note
LS numbers must now be assigned for each telephone or terminal connected to the ISDN bus. How
the LS is set on the telephone depends on the particular phone.
If no LS is assigned for the telephones, the default setting for this port is used as the LS for all
telephones, i.e. when this default LS is called, all the telephones connected to the bus are called.
See also Section 5.2.8
| Siemens
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_818.htm (1 of 2) [06/04/2000 13:13:12]
Action
Action
| Home | First Page | Previous Page
Port
0
| Next Page | Search | Info
Display
System Administration
Port 1: ISDN Public PP
Port 4: ISDN Public PP
Port 4: ISDN Bus
Set time, Set date
| Help |