Overload Indication - Siemens Hicom 150 E Office Service Manual

Hide thumbs Also See for Hicom 150 E Office:

Table of Contents

Hicom 150 E Office Rel.1.0 Service Manual - 7.1 Features for all traffic types

Double-click on parameter for relevant extension

Performing Feature Check

Check the feature for error-free functioning as follows:

Place a call to an internal subscriber who is engaged in an internal or external call.

Dial the override code (*62).

Call override/intrusion is indicated to the parties by means of a warning tone at the beginning

of the call override.

7.1.14 Overload indication

An overload indication (attendant console) can be activated for a fixed extension (first subscriber port

in the system). Pressing the appropriate key displays the waiting calls (key LED). The following

signalling methods are available:

Flashing: call waiting and AC busy

Flickering: waiting call was not answered within 30 seconds; there are more calls than can be

processed by the attendant console

Off: no AC overload

Model-Specific Data

Feature available in

HW requirements

SW requirements

Dependencies/Limitations

Overload indication For France only

Overload indication A LED that is already "flickering" is not reset to "flashing".

Configuration options

The feature can be configured using:

Hicom Assistant T / Hicom Assistant E

http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (16 of 18) [06/04/2000 13:09:16]

digital subscriber module

As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0

Dependency/Limitation

Table of Contents