Siemens Hicom 150 E Office Service Manual page 282

Hicom 150 E Office Rel.1.0 Service Manual - A System programming codes
Codes
11 Call detail recording
11 1 CDRS (call detail recording per station)
11 1 1 View charges, enter extension number (11-74)
11 1 2 Print charges
11 2 CDRT (call detail recording per trunk)
11 2 1 View charges, enter trunk number (1-32)
11 2 2 Print charges
11 3 CDRC (call detail recording, central)
11 3 1 Full/compressed, 0 = compressed / 1 = full
11 3 2 Call number display, suppress digits, 0 = no/ 1 = yes
11 3 3 Incoming calls, 0 = no/ 1 = yes
11 3 4 Call duration, 0 = no/ 1 = yes
11 3 5 Print MSN, 0 = no/ 1 = yes
11 4 Edit charge factor, input from 0 to 65535
11 5 ISDN unit, factor 0 to 65535
11 6 Currency unit, alphanumeric input containing up to 3 digits
11 7 On ringing, 0 = no/ 1 = yes
11 8 CDRA (call detail recording, attendant), phone box, ext.
12 Central abbreviated dialling
12 1 Abbreviated dialling numbers, external call numbers
000 to 999 (OfficePro/OfficeCom); 000 to 299 (OfficePoint)
12 2 Abbreviated dialling names, alphanumeric, up to 16 characters (optiset E memory
only), only if abbreviated dialling number available
13 Account code (ACCT)
13 1 Code entries, list 0 to 999
13 2 Verification mode, 0 = non-verified/1 = Code entried/2 = Code length
13 3 Trunk group mode, 0 = non-verified / 1 = forced
13 4 Code length (1-11)
14 Extension data menu
14 10 Copy subscriber data
14 11 Extension type
14 11 0 Auto-select
14 11 1 Fax
14 11 2 Phone mail 5
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (6 of 18) [06/04/2000 13:07:13]
Table A-4 Expert mode codes
Function