Siemens Hicom 150 E Office Service Manual page 557

Hicom 150 E Office Rel.1.0 Service Manual - 7.13 Euro-ISDN features
CLIR Suppressing station number display for each extension:
*86 = activate
#86 = deactivate
An activated CLIR setting per station cannot be ignored.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Activate CLIR system-wide
*9531994
2. 20-1 => ISDN Parameter Menu - Call ID Suppression
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. Activate CLIR system-wide
Options
2. System Parameters
3. Display
4. Activate Call number suppression on
1. Activate ignore CLIR system-wide (password required)
Options
2. System Parameters
3. Display
4. Deactivate Call number suppression on
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Configure CLIR.
2. Call an internal extension.
3. The call number of the calling extension no longer appears in the display.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_713.htm (4 of 16) [06/04/2000 13:11:53]
Action
Action
Action