Siemens Hicom 150 E Office Service Manual page 456

Hicom 150 E Office Rel.1.0 Service Manual - 7.3 Features for general outgoing traffic
(hotline after timeout). This delay is configured centrally and can be activated and deactivated on each
extension.
Call forwarding and call forwarding - no answer are taken into account at the destination.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Hotline destinations
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Configure Hotline
*9531994
2. 18-2-1 => Boss/Secretary - Hotline - Hotline dest.
3. 18-2-2-2 => Boss/Secretary - Hotline - Hotline stn no.
4. 18-2-3 => Boss/Secretary - Hotline - Hotline timeout
5. 18-2-2-1 => Boss/Secretary - Hotline - Hotline mode
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure Hotline
Options:
2. Set up station
3. Param
4. Flags
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_73.htm (5 of 6) [06/04/2000 13:10:06]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
6
Action
OfficePoint
x x
- -
6 1
OfficeOne
x
-
1