Siemens Hicom 150 E Office Service Manual page 425

Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
The system distributes waiting calls to the UCD group according to priority and the length of time
they have been waiting. In other words, a high-priority waiting call is answered before a low-priority
call that has been waiting longer.
In the case of trunk circuits, the priorities are assigned according to line (per B channel).
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Priority levels
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Define call priority
*9531994
2. 31-4 => UCD Menu - Call priority ext.
3. 31-5 => UCD Menu - Call priority int.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Define call priority
2. Incoming Calls
3. UCD parameters
Performing Feature Check
Check the feature for error-free functioning as follows:
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (22 of 48) [06/04/2000 13:09:58]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0
10
Action
OfficePoint OfficeOne
x _
- -
_
10 _
_
-
_
_