Hicom 150 E Office Rel.1.0 Service Manual - 7.13 Euro-ISDN features
7.13.5 Connected Line Identification Presentation (COLP)
Definition
This feature allows the calling extension to determine whether the connection has actually been
switched to the relevant terminal or whether the call has been accepted by another terminal.
Model-Specific Data
Subject
Feature available in
HW requirements
HW requirements
SW requirements
CO feature
Extension feature
Dependencies/Limitations
Subject Dependency/Limitation
7.13.6 Connected Line Identification Restriction (COLR)
Definition
This feature suppresses the display of the called extension`s number on the calling extension. The
called subscriber can use COLR to prevent his number from being displayed on the calling extension.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
CO feature
Extension feature
Dependencies/Limitations
Subject
Dependency/Limitation
COLR
Same CDBase entry as CLIR
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_713.htm (5 of 16) [06/04/2000 13:11:53]
OfficePro
OfficeCom
x
optiset E with display
S
0
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
x
x
OfficePro
OfficeCom
x
S
0
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
x
x
OfficePoint
x
x
module
x
x
x
x
OfficePoint
x
x
module
x
x
x
x
OfficeOne
x
-
x
x
OfficeOne
x
-
x
x