Call Detail Recording At Station (Cdrs); Optiset E; Definition - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.12 Features for Call Detail Recording

7.12.4 Call Detail Recording At Station (CDRS)

Definition

Every optiset E, a/b, S
memory (call charge memory). At the end of an external call, the final charges are added onto the
already existing call charges in the extension`s call charge memory. The user of an optiset E station
with a display can view his or her current call charges by means of a code.
The current CDRS data can be printed out on a printer connected to one of the V.24 interfaces. The
data is then printed out for all extensions connected to the system.
The system telephone (terminal with programming authorisation) can be used as a call charge display
extension. This extension can:
Display the call charges for one extension.
Display the call charges for all extensions (in the order of their extension numbers).
Reset the call charge memory for a special extension.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
General
requirements
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Conduct a chargeable call.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_712.htm (5 of 21) [06/04/2000 13:08:18]
(or each MSN), CMI terminal in the system has a call charge summation
0
OfficePro
x
With loop start:
GEE8

optiset E

terminal with
display
As of Rel. 1.0
Call charge information from public network
OfficeCom
x
With loop start:
GEE12/16/50
optiset E
terminal with
display
As of Rel. 1.0
Action
OfficePoint
x
With loop start:
GEE12/16/50
optiset E
terminal with
display
As of Rel. 1.0
OfficeOne
x
optiset E
terminal with
display
As of Rel. 1.0