Siemens Hicom 150 E Office Service Manual page 506

Hicom 150 E Office Rel.1.0 Service Manual - 7.6 Features for outgoing external traffic
HW requirements
SW requirements
Dependencies/Limitations
Subject
Extension number transmission
System-wide extension number
display suppression.
CLIR
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Enter the code *86 to activate extension number suppression.
2. Set up an outgoing connection. The extension number is not displayed on the remote
extension.
3. Enter the code #86 to deactivate extension number suppression.
4. Set up an outgoing connection. The extension number is displayed on the remote extension.
| Siemens
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_76.htm (21 of 21) [06/04/2000 13:10:46]
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Temporary extension number suppression must be supported by
the CO.
If system-wide extension number display suppression is activated
(CLIR and COLR), it cannot be overwritten (i.e. temporary
suppression has no effect).
It is possible to ignore an activated CLIR setting and to thus show
the number of the calling party on the display. This may be
practical in the case of emergency calls for example.
| Home | First Page
- -
Dependency/Limitation
Action
| Previous Page | Next Page
-
| Search | Info | Help |