Screened Transfer - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.1 Features for all traffic types
If the other extension is unavailable, the call will camp on. A total of 2 calls can be transferred to a
busy extension simultaneously.
The number of either the A-extension or the B-extension can be displayed on the screen of the transfer
destination (C-extension).
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Ext. transfer destinations Unscreened transfer of internal and external calls to external transfer
Recall
Call charges
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Set up a call.
2. Using the enquiry procedure, call another internal extension.
3. Transfer the call by hanging up the phone before the internal party answers.

7.1.5 Screened Transfer

Definition
Screened transfer is used to connect external calls to an internal extension dialled for an enquiry call.
This feature is activated by hanging up the phone once the called party (extension dialled for enquiry
call) answers the phone. An internal call can also be transferred to an external destination.
Model-Specific Data
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (4 of 18) [06/04/2000 13:09:16]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
destinations is not possible.
If a transferred call is not answered within a certain period of time, a recall
is carried out.
Call charges accrued are charged to the subscriber transferring the call up
until the call is accepted or released. Once the call is answered by the
destination subscriber, the call will be charged to this subscriber.
Action
OfficePoint
x x
- -
Dependency/Limitation
OfficeOne
x
-