Siemens Hicom 150 E Office Service Manual page 297

Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
Dependencies/Limitations
Subject
Date/time Changes may only be made from the configuration extension.
Configuration options
This feature does not have to be explicitly configured for operation on digital trunk lines.
Otherwise, the feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. For systems without digital trunk lines
Set the time: * 95
2. Confirm user data
3. 12
4. Set the date: * 95
5. Confirm user data
6. 13
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. For systems without digital trunk lines
Set daylight saving time table: Options
2. System Parameters
3. Daylight saving time
4. Set date format: Options
5. System Parameters
6. Display
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (3 of 19) [06/04/2000 13:07:30]
Dependency/Limitation
Action
Action
Action