Features For Internal Traffic; Internal Traffic; Direct Station Selection - Siemens Hicom 150 E Office Service Manual

Hide thumbs Also See for Hicom 150 E Office:

Table of Contents

Hicom 150 E Office Rel.1.0 Service Manual - 7.8 Features for internal traffic

7.8 Features for internal traffic

Internal traffic is the setting up of connections between one internal extension and another internal

extension. If the system features Prime Line on, an internal call is set up on optiset E terminals using

the `Extension' key.

If Prime Line on has not been programmed, an internal call is set up by dialling the internal extension

Model-Specific Data

Feature available in

HW requirements

SW requirements

Dependencies/Limitations

Extension key A LED signal has not been assigned to the Extension key.

Configuration options

This feature does not have to be explicitly configured.

The programmable keys on the optiset E terminal (or on the add-on console) can also be programmed

as DSS keys. In this case, the keys provided are programmed with the number of an internal extension

or of an extension group. When you press one of these keys, a direct call to the destination extension

is generated (direct station selection). The call status (ringing, busy, free) of the particular extension is

indicated by the associated LED.

Model-Specific Data

Feature available in

HW requirements

http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (1 of 17) [06/04/2000 13:11:10]

As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0

Dependency/Limitation

optiset E terminal

Table of Contents