System Speed-Dialling - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.6 Features for outgoing external traffic
5. The selected extension number is dialled after a brief wait time.

7.6.3 System Speed-Dialling

Definition
You can store frequently used extension numbers in the system memory. Each number is represented
by a short code that can be used instead of dialling the full extension number.
Speed-dialling numbers are predefined in the system. The codes can be dialled from any subscriber
extension that is assigned to a speed-dialling group.
Use the redial key or the "hash" (#) key to program a "dial pause" and a DTMF changeover function.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Speed-dialling entries in the
system
Max. length of speed-dialling
entries
Dependencies/Limitations
Subject
Ext.extension numbers
Ext.extension numbers
Translation of extension nos. to
names
Tenant service
Entrance telephone
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_76.htm (3 of 21) [06/04/2000 13:10:45]
OfficePro
x
-
As of Rel. 1.0
1000
25 digits
+
6-digit trunk access
code
Speed-dialling destinations can contain external extension
numbers only.
The external extension number must be entered along with the
route or seizure code.
A name can be assigned to each speed-dialling destination
If a tenant service is implemented via trunk access, authorised
seizure of lines is not checked. If speed-dialling is carried out,
the system automatically seizes the next free line regardless of
whether the subscriber is authorised to seize this line or not.
Consequently, an incorrect route telephone number is displayed
on the B station.
Therefore a tenant service should always be implemented via
traffic restriction groups (TRG).
Entrance telephones cannot access speed-dialling numbers
OfficeCom OfficePoint
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
1000
25 digits 25 digits
Dependency/Limitation
OfficeOne
x x
- -
300 300
25 digits