Siemens Hicom 150 E Office Service Manual page 523

Hicom 150 E Office Rel.1.0 Service Manual - 7.8 Features for internal traffic
member of a group.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Single-call radio paging
equipment
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Configure radio paging equipment
*9531994
2. 32-1 => Page - Radio paging port
3. 32-2 => Page - Radio paging type
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. Configure radio paging equipment
Options
2. Trunk modules
3. Ext. connection
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Configure radio paging equipment.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (9 of 17) [06/04/2000 13:11:10]
OfficePro OfficeCom
x
a/b ports a/b ports
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
The extended call processing properties available with enhanced
radio paging equipment are not possible.
Action
Action
Action
OfficePoint
x x
a/b ports
Dependency/Limitation
OfficeOne
x
a/b ports