Siemens Hicom 150 E Office Service Manual page 300

Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Special ring If the station called is an internal station, the call is signalled using a special ring.
Configuration options
The feature can be configured using:
Hicom Assistant T/Hicom Assistant E
Programming Feature via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Configure sensors
* 9531994
2. 27-1 => Sensor Setup - Type
3. 27-2 => Sensor Setup - Destination Number
4. 27-3 => Sensor Setup - No for announcement
5. 27-4 => Sensor Setup - Voice Mail Data
6. 27-5 => Sensor Setup - Call Duration
7. 27-6 => Sensor Setup - Call Interval
8. 27-7 => Sensor Setup - Number of calls
9. 27-8 => Sensor Setup - Damping
10. 27-9 => Sensor Setup - Sensor Name
Programming Feature via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure sensors
Options
2. Trunk modules
3. System flags
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (6 of 19) [06/04/2000 13:07:30]
OfficePro OfficeCom
_ x
_ Control relay module
_ As of Rel. 1.0 As of Rel. 1.0
Action
OfficePoint OfficeOne
x
Dependency/Limitation
_
_
_