Call Detail Recording Per Trunk (Cdrt) - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.12 Features for Call Detail Recording
Check the feature for error-free functioning as follows:
Step
1. Conduct a call on the "pay phone".
2. At the end of the call, the LED for the "call charge display" lights up on the assigned
terminal.

7.12.6 Call Detail Recording Per Trunk (CDRT)

Definition
The system has a summation memory for call charge amounts accrued per trunk line. A memory is
permanently assigned to each line.
A system telephone can query and delete the summation memory. Call charge deletion requires
confirmation. The current CDRT data can be printed out via system administration. The printout
contains a list of CDRT data for all lines connected to the system. The current CDRT data can be
printed out on a printer connected to one of the V.24 interfaces.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
General
requirements
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Conduct a chargeable call.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_712.htm (8 of 21) [06/04/2000 13:08:18]
OfficePro
x
With loop start:
GEE8
optiset E
terminal with
display
As of Rel. 1.0
Call charge information from public network
Action
Action
OfficeCom
x
With loop start:
GEE12/16/50
optiset E
terminal with
display
As of Rel. 1.0
OfficePoint
x
With loop start:
GEE12/16/50
optiset E
terminal with
display
As of Rel. 1.0
OfficeOne
x
optiset E
terminal with
display
As of Rel. 1.0