Assigning Incoming Msi Calls - Siemens Hicom 150 E Office Service Manual

Hide thumbs Also See for Hicom 150 E Office:

Table of Contents

Hicom 150 E Office Rel.1.0 Service Manual - 8.12 Assigning incoming MSI calls

8.12 Assigning incoming MSI calls

Introduction

You can assign any destination extension to an LS trunk for incoming LS calls during the day or

Extension 205 is to be assigned as an MSI destination extension for line 17 during the day and group

450 is to be assigned during the night.

Programming with Hicom Assistant T

*95 31994 Start system administration

Activate Non DID,Day

Select trunk

Enter the extension or ringing group number Trk 17: 205

Call Management Inc., Non DID,Night

Change to Ringing Group

Exit system administration

As an option, the way in which incoming calls are to be handled further can be defined in Call

Management. For more information, please refer to

"Configuring Call Management with group call and call forwarding - no answer".

Programming with Hicom Assistant E

Options -> Incoming Calls -> Ringing assignment per line

Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26

Siemens Part No.: P31003-M1530-X403-2-7620

Conversion Date: 1998-09-18

http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_812.htm [06/04/2000 13:12:44]

System Administration

Set time, Set date

Section 8.10

in the Configuration guidelines,

Table of Contents