Call Pickup From An Answering Machine - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Call an extension.
2. Pick up the call using either the programmed key or the code *59 + extension number.

7.2.31 Call Pickup from an Answering Machine

Definition
optiset E users have the option of picking up a call that was already answered by an answering
machine by pressing the appropriate DSS key. This releases the connection to the answering machine.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
General requirements
Dependencies/Limitations
Subject
Answering machine The answering machine port must be configured as such in the system
Answering machine The answering machine must be programmed under the DSS key on the
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Configure port
*9531994
2. 14-11 => Extension Data Menu - Extension Type
3. Assign `Directed PU' to selected key.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (43 of 48) [06/04/2000 13:10:00]
OfficePro OfficeCom
x
Digital subs./port module
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
optiset E (standard, comfort, memory)
administration.
optiset E terminal.
Action
Action
OfficePoint
x x
Dependency/Limitation
OfficeOne
x
_