En-Bloc Dialling - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.6 Features for outgoing external traffic
2. 17-11 => Call Management Out - Simplified Dialling
3. Configure line keys / call keys
*91 => Entry to key programming.
4. Configure relevant key.
5. Assign selected key as line key / call key.
6. Route assignment
*9531994
7. 17-12 => Call Management Out -Route Assignment.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. Configure Prime Line on (automatic line seizure)
Options
2. Lines / networking
3. Routing parameters
4. Route assignment
Options
5. Lines / networking
6. Trunks
7. Configure line keys / call keys
Options
8. Set up station
9. Key programming
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Configure Prime Line on.
2. Dial a number
3. The trunk line is seized automatically.

7.6.6 En-Bloc Dialling

Definition
The digits entered during the dialling operation are combined to form a block, stored in the system,
and forwarded when they are recognised as being complete.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_76.htm (7 of 21) [06/04/2000 13:10:45]
Action
Action